cancel
Showing results for 
Search instead for 
Did you mean: 

Asus Rog Ryujin III 360 ARGB Extreme Lcd Screen Not Working

anilk34
Level 7

Hello,

Yesterday, Armoury Crate received an ASUS Framework update, which I installed successfully. After completing the update, I shut down my PC completely and went to sleep.

When I woke up and turned on my PC, I noticed that the LCD screen on my AIO cooler stayed black and wasn’t working. I restarted the PC, but the issue persisted. Then, I shut down the computer, unplugged and reconnected all the cables of the cooler — unfortunately, that didn’t fix it either.

Interestingly, when I turned off the power supply switch and held the power button for about 30 seconds, the LCD screen turned on and the animation appeared. However, once I switched the power supply back on, the screen went black again and stopped working.

To try fixing the issue, I used the Armoury Crate Uninstall Tool to completely remove the software, then reinstalled Armoury Crate after rebooting the PC — but the problem still remains.

I also tried turning the cooler’s LCD display off and on again from within the Armoury Crate software, as well as changing the animation, but none of these attempts worked.

Does anyone know how to resolve this issue?


(Windows 10 Pro 64 bit)

Item Version

---- -------

Armoury Crate UWP App 6.3.6.0

ROG Live Service 3.3.12.0

Aura Service (Lighting Service) 3.08.59

Armoury Crate service 6.3.6.0

Aura Wallpaper Service Not installed

Aura SDK 3.05.13

ArmouryDevice 4.2.4.7

ASUS AIOFan HAL 1.5.4.0

ASUS AURA Extension Card HAL 1.1.0.20

ASUS AURA Motherboard HAL 1.6.1.2

ASUS Ambient HAL 7.8.0.0

ASUS Keyboard HAL 1.3.18.0

AacVGA 0.0.7.9

KingstonDram 1.1.44

AURA DRAM Component 1.1.29

ENE RGB HAL 1.1.60.0

ENE_EHD_M2_HAL 1.0.14.0

Patriot Viper DRAM RGB 1.0.9.8

Patriot Viper M2 SSD RGB 1.1.0.3

Universal Holtek RGB DRAM 1.0.0.7

WD_BLACK AN1500 1.0.14.0

AIOFanSDK 3.00.32

AIOFanSDKAddOn 1.1.2

AIOFanSDKPlugin 2.00.02

AiSuiteSDK 1.03.12

GameFirstSDK 6.2.7.0

KeyboardSDK 3.00.94

MainSDK 2.01.46

MbLedSDK 3.00.57

VgaSDK 1.00.22

Armoury Crate Plugin - Aio 2.1.1

Armoury Crate Plugin - Keyboard 1.3.13

Armoury Crate Plugin - Motherboard 1.3.0

Armoury Crate Plugin - ROG FAN XPERT 4 2.0.14

Armoury Crate Plugin - Vga 1.0.4

ASUS Motherboard 4.08.04

GameFirst 1.6.1

ROG CLAYMORE II 4.01.08

ROG CLAYMORE II (2.4GHz) 4.01.08

ROG FAN XPERT 4 4.02.06

ROG RYUJIN III EXTREME 4.03.27

VGA 3.01.10

Xbox360 Controller Emulator 1.0.0.15

 

 

249 Views
1 REPLY 1

anilk34
Level 7

Issue Resolved

I managed to fix the issue with the following steps:

Restored Windows to a System Restore Point from one day earlier.

Completely shut down the PC.

Turned off the UPS and Power Supply Unit (PSU) — making sure no power was going to the PC at all.

While everything was off, pressed and held the power button for about 2 minutes to discharge any remaining power.

Turned the UPS and PSU back on.

Booted the PC — and bingo! The LCD screen came back to life, showing the animation again.

Opened Armoury Crate, tested animation changes — everything worked fine.

I’ll shut down and restart again to confirm it remains stable, but so far, the LCD display is back and functioning normally.